Rowlett Concrete Lifting logoRowlett Concrete LiftingRowlett, TX
Commercial concrete leveling photo

Rowlett Concrete Lifting

Mudjacking / Slab Leveling in Rowlett, TX

Mudjacking and slab leveling in Rowlett raises driveways and heavy flatwork with a soil-cement slurry. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Rowlett and nearby communities.

Rowlett's newer subdivisions, the ones built since the 2020 census growth spurt, sit on concrete flatwork that's still settling into North Texas clay. Big driveway slabs often need more than a light fill. That's where mudjacking earns its keep.

Mudjacking pumps a soil-cement slurry beneath the slab, using its added weight to hold the lift over time. Rowlett Concrete Lifting reaches for mud when a panel is large, heavy, or has already re-settled once with a lighter fix. It's an older method, but a proven one for the right slab.

What's included

What's Included with Mudjacking / Slab Leveling

Typically included: Optional: Customer prep:

  • Slab inspection and void mapping before drilling
  • 1.5" to 2" ports drilled at the low points
  • Soil-cement slurry pumped and monitored in stages
  • Hole patching and site cleanup
  • Sealing existing cracks along the panel edges
  • Grade check on adjoining sidewalk sections
  • Move vehicles off the driveway for the full visit

How it works

How Our Mudjacking / Slab Leveling Process Works

  1. Site visit and slab assessment photo
    Step 1

    Inspection

    Crew checks slab weight, size, and settlement history.

  2. Lot assessment photo
    Step 2

    Port drilling

    Larger holes drilled at calculated lift points.

  3. Mix and pump slurry photo
    Step 3

    Slurry pumping

    Mix pumped under pressure, raising the slab gradually.

  4. Stage lifting photo
    Step 4

    Stage lifting

    Panel raised in small increments to avoid cracking.

  5. Check the soil photo
    Step 5

    Grade check

    Crew confirms slope matches adjoining slabs.

  6. Hole patching photo
    Step 6

    Patch and clean

    Holes capped, worksite swept.

FAQs

Mudjacking / Slab Leveling FAQs

Can you lift the same slab more than once?

Yes. If a panel settles again due to ongoing soil movement, mudjacking can be repeated. Repeated settling in the same spot usually means the drainage issue underneath needs a separate look.

How much does slab jacking cost per square foot?

Cost depends more on panel size and lift height than a flat per-square-foot number, since heavier slabs need more slurry and more port work. A written estimate after inspection gives an honest number.

Is mudjacking messier than foam?

A little. The slurry can track slightly at the ports before it sets, but the crew contains it and cleans up before leaving.

How long does mudjacking last?

Well-executed mudjacking on a properly diagnosed slab typically holds for many years. Longevity depends more on soil conditions than the material itself.

Does mudjacking work on cracked driveways?

It levels the panel but doesn't repair existing cracks. Cracked sections sometimes get a separate patch after the lift.

Next step

Get a Mudjacking / Slab Leveling Estimate in Rowlett

Call +1 (254) 870-8251 for a free estimate on your driveway or flatwork slab.

See Polyurethane foam jacking for lighter jobs, or go Home / Contact.

Ask about Mudjacking / Slab Leveling

Tell us about the project and how to reach you.

Call (254) 870-8251